Okay, here is the one thing that I’ve been wanting to learn to do since I first got a serger, oh, 8 years ago or so. I always figured it would be crazy complicated and hard. I’m a huge dweeb becuase it’s crazy CRAZY easy and I’ve been missing out for 8 years.
Anyway, blind stitch foot. Get it. Slap it on your machine.
Thread your machine for a 3thread overlock, and remove RIGHT needle. Keep that left need good and tight in place, though.
Set your machine as follows:
Stitch width: 5mm
Stitch length: 2-4mm
Needle thread tension: 0-3
Upper looper: 2-5
Lower looper: 6-9
Place them either right sides facing, or wrong sides depending on if you want ladders or loops. I wanted loops, so wrong sides facing. Not that you can tell on scrap muslin, but whatever.